Sharp AR-C260 주요 운영자 매뉴얼 - 페이지 5
{카테고리_이름} Sharp AR-C260에 대한 주요 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-C260 19 페이지. Color adjustment
Sharp AR-C260에 대해서도 마찬가지입니다: 네트워크 스캐너 운영 (42 페이지), 프린터 사용 설명서 (50 페이지), 소프트웨어 설치 매뉴얼 (25 페이지), 컬러 관리 매뉴얼 (8 페이지), 설치 매뉴얼 (15 페이지), 사용자 설명서 (8 페이지)
페이지 인쇄
Using the key operator programs
NOTE
When using the key operator programs for the first time, register a key operator code number. (See steps 3 to 5 below.)
1
Press the [CUSTOM SETTINGS] key.
Touch the [KEY OPERATOR PROGRAMS]
2
key.
ADDRESS
CONTROL
KEY OPERATOR PROGRAMS
3
Use the numeric keys to enter the five-digit
key operater code number.
KEY OPERATOR CODE
Supplementary explanation of key operation for key operator programs
KEY OPERATOR PROGRAMS
DEVICE CONTROL
ORIGINAL SIZE DETECTOR SETTING
DISABLING OF DUPLEX
DISABLING OF STAPLER
The name of the program category or particular item to be set will appear on the touch key. The displayed item
is selected by touching the key.
Check mark boxes are touch keys that show the status of selections. A box with a check mark means the
function is "on" (enabled) and an unchecked box means the function is "off" (disabled). The on/off status
changes each time the box is touched.
If the settings continue on the following screen(s), touch the [
through the screens. To return to the category selection screen, touch the [OK] key.
The currently set numerical value is displayed.
Numerical values can be set by touching the [
Each time a number is
entered, the dashes (-)
in the display will change
to asterisks (*). The
factory default setting for
the key operator code
number is 00000.
DISABLING OF DOCUMENT
FEEDER
DISABLING OF INVERTER
DISABLING OF OPTIONAL
PAPER DRAWER
KEY OPERATOR PROGRAM LIST
4
Touch a key to select the desired category
of key operator programs.
ACCOUNT
ENERGY SAVE
CONTROL
PRINTER
COPY SETTINGS
SETTINGS
KEY OPERATOR
LIST PRINT
CODE CHANGE
5
Adjust the setting(s) of the selected
program.
Detailed descriptions for program settings start on
the page 5.
Press the [CA] key to exit the program.
6
These keys and indicator are available
on setting screens that require the
entry of numerical values.
OK
1/3
] and [
] and [
] keys.
<Example>
For registration of the
key
operator
number,
touch
OPERATOR
CODE
CHANGE".
(1-999)
20
SEC.
] keys to move back and forth
code
"KEY
3