Sharp AR-C260 프린터 사용 설명서 - 페이지 28

{카테고리_이름} Sharp AR-C260에 대한 프린터 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-C260 50 페이지. Color adjustment
Sharp AR-C260에 대해서도 마찬가지입니다: 네트워크 스캐너 운영 (42 페이지), 주요 운영자 매뉴얼 (19 페이지), 소프트웨어 설치 매뉴얼 (25 페이지), 컬러 관리 매뉴얼 (8 페이지), 설치 매뉴얼 (15 페이지), 사용자 설명서 (8 페이지)

PRINTER CONFIGURATION THROUGH THE NETWORK

Access setup

The restrictions on access to the Web pages and basic settings for using the network scanner and the status/alert

E-mail function are described below.

I I I I Network Card Setup

A link to the network card Web page for configuring the print server card (network interface card) is provided. The

Admin password is the same as the Web Page password of the network card.

I I I I Password Setup

Password access to the Web pages can be set. Two types of passwords (user and administrator) are

configurable.

A user password allows the user to store, edit, and delete transmission destinations. An administrator password

provides the same rights as a user password, but also allows configuration of all administrative settings, including

basic network scanner settings and e-mail status alert settings.

I I I I Network Scanning Setup

Basic setting screen for the network scanner. E-mail subject for scanner delivery, file name, etc. are set. To use

the network scanner, you must set up E-mail & DNS Setup. This screen displays the E-mail & DNS Settings and

provides a link to E-mail & DNS Setup.

I I I I Status & Alert E-mail Setup

Basic setting screen for the status & alert E-mail system. Machine name, machine code, and machine installation

location are set. To use the status & alert E-mail function, you must set up E-mail & DNS Setup. This screen

displays the settings of E-mail & DNS Settings and provides a link to E-mail & DNS Setup.

I I I I E-mail & DNS Setup

Basic setting screen for transmitting E-mail. E-mail server, system administrator address, DNS server, etc. are

set.

I I I I Sender E-mail Setup

The sender of E-mail transmissions from the network scanner is configured. The sender will be set as the "From"

item of the E-mail header. Up to 20 senders can be registered and a sender can be selected among them from

the operation panel.

I I I I Custom Directory Setup

User index names in the display list on the operation panel are set.

I I I I Status Message Parameters Setup

The parameters used when the current counter information of this machine such as print count, copy count, and

total output is delivered in accordance with the specified schedule by an E-mail status message.

I I I I Alerts Message Parameters Setup

The parameters for the alert message address information are registered by alert message setup. The alert

message is transmitted when a problem such as a supplies requirement (toner or paper) or errors(device failure

or paper misfeed) occur.

I I I I SNMP Trap Setup

IP addresses, trap community, and authentication community are set.

TABLE OF CONTENTS

BEGINNING OF CHAPTER

3-4