Sharp AR-C260 컬러 관리 매뉴얼 - 페이지 2

{카테고리_이름} Sharp AR-C260에 대한 컬러 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-C260 8 페이지. Color adjustment
Sharp AR-C260에 대해서도 마찬가지입니다: 네트워크 스캐너 운영 (42 페이지), 주요 운영자 매뉴얼 (19 페이지), 프린터 사용 설명서 (50 페이지), 소프트웨어 설치 매뉴얼 (25 페이지), 설치 매뉴얼 (15 페이지), 사용자 설명서 (8 페이지)

Adjusting the Colour Balance

As the printer is used, ambient conditions and the depletion of consumables (the toner cartridge and drum

cartridge) can gradually cause changes to occur in the four colour components of colour images, cyan,

magenta, yellow, and black. This results in deviations in the colour balance.

These deviations in the colour balance occur gradually over a long period of time. Ambient conditions

(temperature and humidity) and the number of times the printer is used can have a large effect on colour

deviation.

The printer has two colour adjustment functions for the purpose of correcting deviations in the colour bal-

ance. These functions are executed from the key operator programs. For details on using key operator

programs, see the Key Operator's Guide.

When should the colour balance be adjusted?

• Colour adjustment can be performed whenever a noticeable change occurs in the colour balance.

• Colour adjustment should always be performed when one of the toner cartridges (cyan, magenta, yellow,

or black) is replaced.

Colour adjustment functions

The printer has the following two colour adjustment functions:

• Colour Balance settings

This function is used to adjust each of the density levels (low, mid, and high) of the four colour compo-

nents, cyan, magenta, yellow and black. Use this mode when the colour deviation is large.

• Easy calibration

This mode is used for fine adjustment of the grey balance at the mid density level of the colours cyan,

magenta, and yellow. Use this mode to correct minor colour deviations.

Use the key operator program on page 3 of the Key Operator's Guide to

print a test page

Do the colours on the test page match the colours on the standard

colour chart included with the printer? (see page 4)

Using the Colour Balance set-

tings (see page 5)

How much do the colours differ?

Large difference

Print a test page (see page 3)

Colour balance is successfully adjusted

Yes

Small difference

Using Easy Calibration

(see page 7)