Sharp AR-C260M 사용자 설명서 - 페이지 2

{카테고리_이름} Sharp AR-C260M에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-C260M 8 페이지. Color adjustment
Sharp AR-C260M에 대해서도 마찬가지입니다: 네트워크 스캐너 운영 (42 페이지), 주요 운영자 매뉴얼 (19 페이지), 프린터 사용 설명서 (50 페이지), 소프트웨어 설치 매뉴얼 (25 페이지), 컬러 관리 매뉴얼 (8 페이지), 설치 매뉴얼 (15 페이지)

Adjusting the Color Balance

As the printer is used, ambient conditions and the depletion of consumables (the toner cartridge and drum

cartridge) can gradually cause changes to occur in the four color components of color images, cyan, ma-

genta, yellow, and black. This results in deviations in the color balance.

These deviations in the color balance occur gradually over a long period of time. Ambient conditions (tem-

perature and humidity) and the number of times the printer is used can have a large effect on color devia-

tion.

The printer has two color adjustment functions for the purpose of correcting deviations in the color balance.

These functions are executed from the key operator programs. For details on using key operator programs,

see the Key Operator's Guide.

When should the color balance be adjusted?

• Color adjustment can be performed whenever a noticeable change occurs in the color balance.

• Color adjustment should always be performed when one of the toner cartridges (cyan, magenta, yellow,

or black) is replaced.

Color adjustment functions

The printer has the following two color adjustment functions:

• Color Balance settings

This function is used to adjust each of the density levels (low, mid, and high) of the four color components,

cyan, magenta, yellow and black. Use this mode when the color deviation is large.

• Easy calibration

This mode is used for fine adjustment of the gray balance at the mid density level of the colors cyan,

magenta, and yellow. Use this mode to correct minor color deviations.

Use the key operator program on page 3 of the Key Operator's Guide to

print a test page

Do the colors on the test page match the colors on the standard color

chart included with the printer? (see page 4)

Using the Color Balance set-

tings (see page 5)

How much do the colors differ?

Large difference

Print a test page (see page 3)

Color balance is successfully adjusted

Yes

Small difference

Using Easy Calibration

(see page 7)