Sharp AR-C360P 인쇄 매뉴얼 - 페이지 28
{카테고리_이름} Sharp AR-C360P에 대한 인쇄 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-C360P 46 페이지. Sharp ar-c360p: supplementary guide
Sharp AR-C360P에 대해서도 마찬가지입니다: 소프트웨어 설치 매뉴얼 (29 페이지)
![Sharp AR-C360P 인쇄 매뉴얼](/uploads/products/server2/5048399/5048399.png)
Custom page size
This feature enables printing on non-standard sized print media.
The multipurpose tray is used for feeding non-standard media sizes.
Print media width can be from approximately 2 to 13 in. (51 to 328
mm), and its length can be from 5 to 47.14 in. (128 to 1200 mm).
Actual limits vary slightly depending on which printer driver you use
and your computer's operating system.
Some software applications may not produce the desired results
with non-standard print media sizes, and some experimentation
may be required to obtain the results you want.
NOTES
If you are using heavy media, transparencies, envelopes or labels,
use the face up (straight through) paper feed path.
For face up printing (straight-through path), make sure the rear
exit is open and the paper support is extended.
>
Paper is stacked in reverse order.
>
Tray capacity is about 100 sheets. (Actual capacity
depends on paper weight.)
How to create, edit, and delete a custom page size
1.
On the driver's [Setup] tab, click the [Paper Feed Options...]
button.
2.
In the Paper Feed Options window, click [Custom Size...].
If you have previously saved any custom sizes they will be
listed in the Custom Size window.
3.
To create a new custom size:
(a)
Enter the desired dimensions in the Width and Length
boxes.
(b)
Enter a name for the new size in the Name box, and
click [Add>>] to save it in the list.
To edit a previously saved custom size:
(a)
Click its name in the list and edit its dimensions and/or
name.
(b)
Click [Modify].
Sharp AR-C360P Printing Guide
Finishing options> 28