Sharp AR-M160 소프트웨어 설정 매뉴얼 - 페이지 6

{카테고리_이름} Sharp AR-M160에 대한 소프트웨어 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-M160 20 페이지. Digital document solutions
Sharp AR-M160에 대해서도 마찬가지입니다: 온라인 매뉴얼 (33 페이지), 브로셔 및 사양 (6 페이지)

페이지 인쇄

INSTALLING THE SOFTWARE

• In the following explanations it is assumed that the mouse is configured for right hand operation.

Note

• The scanner feature only works when using a USB cable.

• If an error message appears, follow the instructions on the screen to solve the problem. After the problem is

solved, the installation procedure will continue. Depending on the problem, you may have to click the "Cancel"

button to exit the installer. In this case, reinstall the software from the beginning after solving the problem.

• When installing Sharpdesk, a minimal version of Internet Explorer 5.01 will be installed on your computer if your

computer does not currently have Internet Explorer version 4.01 or later

INSTALLATION IN WINDOWS XP (USB/PARALLEL CABLE)

The USB or parallel cable must not be

connected to the machine. Make sure

that the cable is not connected before

proceeding.

If the cable is connected, a Plug and Play window

will appear. If this happens, click the "Cancel" button

to close the window and disconnect the cable.

The cable will be connected in step 11.

Note

Insert the CD-ROM into your CD-ROM

drive.

Click the "start" button, click "My

Computer" (

), and then double-click

the CD-ROM icon (

Double-click the "setup"

If the language selection screen appears after

Note

you double click the "setup" icon, select the

language you wish to use and click the "Next"

button. (Normally the correct language is

selected automatically.)

Select the software packages to be

installed and then click the "Next" button.

Software packages with a checkmark ( ) in the

list on the screen will be installed.

Click the "Display README" button to show

information on packages that are selected.

(

)

icon

• If you are using a parallel cable, do not

Note

select the Button Manager checkbox (this

feature is not supported when a parallel

cable is used).

• If the following screen appears, click the

"OK" button. For the software that can be

installed, see "INSTALLATION

ENVIRONMENT AND USEABLE

SOFTWARE" (p. 3).

Check the packages on the screen,

and then click the "Start" button.

The software packages to be installed will be

displayed on the screen. If an incorrect package

is displayed, click the "Back" button and select

the correct packages.