Sharp AR-M205 온라인 매뉴얼 - 페이지 31
{카테고리_이름} Sharp AR-M205에 대한 온라인 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-M205 33 페이지. Digital multifunctional system
Sharp AR-M205에 대해서도 마찬가지입니다: 소프트웨어 설정 매뉴얼 (20 페이지)
3
SCAN
Outline of Button Manager
Button Manager is a software utility that links scanning functions to the scanner key on the machine. The Button Manager software
allows you to assign scan settings to each of the six scan menu keys on the machine.
To view Help for a setting, click the
☞
To begin scanning using the machine's operation panel, settings must be established in the Control Panel after Button Manager is
installed. For information on installing Button Manager and establishing the Control Panel settings, see "SETTING UP BUTTON
MANAGER" in the Software Setup Guide. For information on scanning using the machine's operation panel, see "USING THE
SCANNER MODE" in the Operation Manual.
1
2
3
4
5
6
7
8
You can use Button Manager to select and change the functions of the six scan menus. Refer to
CONTENTS
button in the upper right-hand corner of the window and then click the setting.
I N D E X
Tab
1
Click to set scan menu
options. Each tab contains
scan settings for the scan
menu keys (SC1 through
SC6) on the machine.
"Application Selection" area
2
Select the start-up
application here.
"Show TWAIN setting
3
screen when scanning"
Checkbox
You can select whether or not
the TWAIN screen is shown.
When the checkbox is
selected, the TWAIN screen
appears when scanning is
executed to let you adjust the
scanning conditions.
"Scan Setup" area
4
Set the scan conditions.
Some applications
Note
may limit your
choice of settings.
"OK" button
5
Click to save your settings
and exit the dialog box.
6
"Cancel" button
Click this button to exit the
dialog box without making
any changes to the settings.
"Apply" button
7
Click to save your settings
without closing the dialog box.
8
"Help" button
Click this button to display the
help file for Button Manager.
Button Manager
Settings.
31