Sharp AR-M207 운영 매뉴얼 - 페이지 16

{카테고리_이름} Sharp AR-M207에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-M207 35 페이지. Digital multifunctional system
Sharp AR-M207에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (44 페이지), 사용자 설명서 (3 페이지), 사양 (8 페이지)

페이지 인쇄

SCAN

This chapter explains how to scan from a computer connected to the machine by a USB cable, and how to scan

using the machine's operation panel.

When the dual function board is installed

Note

Before using the machine in USB 2.0 High-speed mode, be sure to read "USB2.0 MODE" and "System

requirements for USB 2.0 (Hi-Speed mode)" in the "Key operator's guide".

SCANNING OVERVIEW

The flow chart shown below provides an overview of scanning.

The environment in which the machine's scanning function can be used is subject to certain limitations. For more

Caution

information, see "1. INSTALLING THE SOFTWARE (THAT ACCOMPANIES THE MACHINE)" in the "Software

setup guide".

Scanning from a

TWAIN*

-compliant or

WIA*

-compliant application

For more information, see "4. COPY FUNCTIONS" in the "Operation manual (for general information and copier)".

Start up a Twain-compliant

or WIA-compliant

application, and select the

machine's scanner driver.

Scanning

SCANNING FROM A

TWAIN-COMPLIANT

APPLICATION (page

SCANNING FROM A

WIA-COMPLIANT APPLICATION

(WINDOWS XP) (page 20)

*1 TWAIN is an international interface standard for scanners and other image acquisition devices. By installing a TWAIN driver on

your computer, you can scan and work with images using a variety of TWAIN-compliant applications.

*2 WIA (Windows Imaging Acquisition) is a Windows function that allows a scanner, digital camera or other imaging device to

communicate with an image processing application. The WIA driver for this machine can only be used in Windows XP.

*3 To begin scanning using the machine's operation panel, settings must be configured in the Control Panel after Button Manager

is installed. For more information, see "SETTING UP BUTTON MANAGER" in "1. INSTALLING THE SOFTWARE (THAT

ACCOMPANIES THE MACHINE)" in the "Software setup guide".

Scanning from the "Scanner

and Camera Wizard"

(Windows XP)

Place the original in the scanning position

Start up the "Scanner and

Camera Wizard" from

"Control Panel" in your

computer.

Set the scan preferences

SCANNING FROM THE

"SCANNER AND CAMERA

16),

WIZARD" (WINDOWS XP)

(page 21)

Scanning

Using the machine to begin

scanning

Press the [SCAN] key on the

machine to switch to

scanner mode and select the

destination (SC1: to SC6:)

Scanning

SCANNING USING THE

KEYS ON THE MACHINE

(page

23),

BUTTON MANAGER (page 24)