Sharp AR-M236 주요 운영자 매뉴얼 - 페이지 14

{카테고리_이름} Sharp AR-M236에 대한 주요 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-M236 24 페이지. Digital multifunctional system
Sharp AR-M236에 대해서도 마찬가지입니다: 소프트웨어 설정 매뉴얼 (18 페이지), 소프트웨어 설정 매뉴얼 (20 페이지), 브로셔 및 사양 (9 페이지)

페이지 인쇄

GENERAL PROGRAMS

STREAM FEEDING MODE

(When a RSPF is installed)

Use this program to enable stream feeding mode.

When this mode is enabled and originals are scanned

from the RSPF, an original can be added to the RSPF

within 5 seconds after the previous original is fed, and

be automatically scanned using the settings of the

previous original. This function can be used with the

copy function and the scanner function.

DISPLAY LANGUAGE SETTING

This program is used to change the language used in

the display.

DISABLE DISPLAY TIMEOUT

When this program is disabled, the display will close

the screen that is currently open and return to the

initial screen if no keys are touched for 60 seconds.

When the program is enabled, the display will not

close the screen that is currently open.

DISABLING OF TRAY SETTINGS

This program can be enabled to prohibit changes to

the paper tray settings in the user settings.

Note that bypass tray settings will still be possible.

DEVICE CONTROL

KEY OPERATOR PROGRAMS

DEVICE CONTROL

DISABLING OF DOCUMENT

FEEDER

DISABLING OF DUPLEX

DISABLING OF STAPLER

Use these programs when a peripheral device on the

machine has failed or when you wish to temporarily

disable a device. The programs can also be used to

change the function setting of a device as required by

your conditions of use.

"DEVICE CONTROL" consists of the following

programs:

● DISABLING OF DOCUMENT FEEDER

● DISABLING OF DUPLEX

● DISABLING OF STAPLER

● OUTPUT TRAYS

● OFFSET FUNCTION SETTING

● MEMORY FOR PRINTER

● DISABLING OF CENTRE TRAY COUNTING

● RETURN FROM COPY MODE TIMING

● MIX SIZE ORIGINAL FEEDING MODE

DISABLING OF DOCUMENT FEEDER

(When a RSPF is installed)

Use this program when the RSPF is not operational or

you wish to disable the automatic feeding function.

(Originals can still be scanned using the document

glass.)

DISABLING OF DUPLEX

Use this program when you wish to disable the

two-sided printing function or the function has failed.

When this program is enabled, only one-sided printing

is possible.

DISABLING OF STAPLER

(When a FINISHER is installed)

Use this program to disable stapling.

When this program is enabled, stapling does not take

place.

1/3