Sharp AR-M237 IMAGERs 소프트웨어 설정 매뉴얼 - 페이지 8

{카테고리_이름} Sharp AR-M237 IMAGERs에 대한 소프트웨어 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-M237 IMAGERs 18 페이지. Digital multifunctional imager
Sharp AR-M237 IMAGERs에 대해서도 마찬가지입니다: 사양 (2 페이지), 소프트웨어 설정 매뉴얼 (20 페이지), 주요 운영자 매뉴얼 (24 페이지), 빠른 참조 매뉴얼 (39 페이지), 빠른 참조 매뉴얼 (39 페이지)

페이지 인쇄
Sharp AR-M237 IMAGERs 소프트웨어 설정 매뉴얼
INSTALLING THE SOFTWARE

INSTALLATION IN WINDOWS 98/ME/2000 (USB CABLE)

1
The USB cable must not be connected
to the machine. Make sure that the
cable is not connected before
proceeding.
If the cable is connected, a Plug and Play
window will appear. If this happens, click the
"Cancel" button to close the window and
disconnect the cable.
The cable will be connected in step 12.
Note
2
Insert the CD-ROM into your computer's
CD-ROM drive.
3
Double-click "My Computer" (
then double-click the CD-ROM icon
(
).
4
Double-click the "setup" icon (
If the language selection screen appears
Note
after you double click the "setup" icon,
select the language that you wish to use
and click the "Next" button. (Normally the
correct language is selected automatically.)
5
The License Agreement window will
appear. Make sure that you understand
the contents of the license agreement,
and then click the "Yes" button.
6
Read the message in the "Welcome"
window and then click the "Next" button.
7
Select the checkboxes of the software
packages to be installed and then click
the "Next" button.
Click the "Display README" button to show
information on packages that are selected.
6
Note
), and
8
Check the packages on the screen, and
then click the "Start" button.
The software packages to be installed will
be displayed on the screen. If an incorrect
).
package is displayed, click the "Back"
button and select the correct packages.
9
The files required for installation of the
printer driver are copied (if "Printer
Driver" was selected in Step 7).
Follow the on-screen instructions.
When you are asked how the printer is
connected, select "Connected to this
computer" and click the "Next" button.
The PC-FAX driver can only be used if
the facsimile expansion kit is installed.