Sharp AR-M257 - Digital Imager B/W Laser 온라인 매뉴얼 - 페이지 15
{카테고리_이름} Sharp AR-M257 - Digital Imager B/W Laser에 대한 온라인 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-M257 - Digital Imager B/W Laser 36 페이지. Operation manual for network scanner
Sharp AR-M257 - Digital Imager B/W Laser에 대해서도 마찬가지입니다: 운영 매뉴얼 (4 페이지), 브로셔 및 사양 (8 페이지), 사양 시트 (2 페이지), 설정 매뉴얼 (20 페이지), 운영 매뉴얼 (48 페이지)
페이지 인쇄
1
PRINT
Stapling printed pages (when a finisher is installed)
When a finisher is installed, printed pages can be stapled.
To use this feature, open the printer driver setup screen and select it in the "Finishing"
field of the "Main" tab.
☞
See
Basic printing
for details on how to open the printer driver.
●
The maximum number of sheets that can be stapled is 30. When a saddle stitch finisher is installed, up to 50 sheets can be stapled
Note
(up to 25 sheets when the paper size is B4, Foolscap, or larger).
●
Paper sizes that can be used for staple printing are Ledger, Letter, Letter-R, Legal, A3, A4, A4R, B4, B5, B5R, and Foolscap. (B5R
can only be used when a saddle stitch finisher is installed.)
●
Paper types that can be used for staple printing are Plain, Letter Head, Recycled and Color.
●
Staple printing is not possible when the ROPM function is disabled. (See "CONFIGURING THE PRINTER DRIVER" in the software setup guide.)
●
If the finisher is disabled in the key operator programs, the staple and punch functions cannot be used and output cannot be
delivered to the offset tray. (See "USING THE KEY OPERATOR PROGRAMS" in the operation manual for the saddle stitch
finisher, and "DISABLING OF STAPLER" in the key operator's guide.)
●
Stapling is not possible if disabled in the key operator programs (see "DISABLING OF STAPLER" in the key operator's guide).
When a finisher is installed
The following example shows how portrait oriented pages are stapled together.
C O N T E N T S
Print data
The pages are
stapled in the
upper left-hand
corner.
Printing result
(part 1)
15