Sharp AR-M277 IMAGERs 소프트웨어 설정 매뉴얼 - 페이지 11

{카테고리_이름} Sharp AR-M277 IMAGERs에 대한 소프트웨어 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-M277 IMAGERs 18 페이지. Digital multifunctional imager
Sharp AR-M277 IMAGERs에 대해서도 마찬가지입니다: 사양 (2 페이지), 소프트웨어 설정 매뉴얼 (20 페이지), 주요 운영자 매뉴얼 (24 페이지), 빠른 참조 매뉴얼 (39 페이지), 빠른 참조 매뉴얼 (39 페이지)

페이지 인쇄

When the interface selection screen

appears, select "Parallel" and click the

"Next" button.

Select the printer port and click the

"Next" button.

Select "LPT1" for the printer port.

If "LPT1" does not appear, another printer

Note

or peripheral device is using LPT1. In this

case continue the installation, and after the

installation is finished, change the port

setting so that the machine can use LPT1.

This procedure is explained in "Another

printer is using the parallel port (when

using a parallel cable)" on page 14.

When the model selection window

appears, select model name of your

machine and click the "Next" button.

For the model name of your machine, see

"PART NAMES AND FUNCTIONS" in the

operation manual for copier.

Click the "Yes" button.

INSTALLING THE SOFTWARE

When "The installation of the SHARP

software is complete" appears, click

the "OK" button.

Begin the installation of the PC-FAX driver

(if "PC-FAX Driver" was selected in Step 7).

Follow the on-screen instructions.

• When the model selection window appears,

select model name of your machine.

• During installation of the PC-FAX driver,

you will be asked to select the port. If

you are using the parallel port, select

"LPT1" and continue the installation.

Click the "Finish" button when the message

informs you that setup is successful.

When the "Finish" screen appears,

click the "Close" button.

When "After Windows system restarts,

connect the interface cable to the PC"

appears, click the "OK" button.

After the installation, a message

Note

prompting you to restart your computer

may appear. In this case, click the "Yes"

button to restart your computer.

Turn off the power of the machine and

your computer, and connect the

machine to your computer with the

parallel cable. (p. 10)

After connecting the machine to your

computer, turn on the power of the

machine and then start up your computer.

This completes the installation of the software.

• If you installed the printer driver, configure the

printer driver settings as explained in

"CONFIGURING THE PRINTER DRIVER" (p. 11).