Sharp AR-M318 운영 매뉴얼 - 페이지 28

{카테고리_이름} Sharp AR-M318에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-M318 48 페이지. Operation manual for network scanner
Sharp AR-M318에 대해서도 마찬가지입니다: 운영 매뉴얼 (4 페이지), 설정 매뉴얼 (20 페이지)

페이지 인쇄
Sharp AR-M318 운영 매뉴얼
SCANNING SETTINGS
(ORIGINAL SIZE, QUALITY, RESOLUTION,
FILE FORMAT, AND SEND SETTING)
When sending an image, you can change the original scan size, quality, resolution, file format, and file name.

MANUALLY SETTING THE SCANNING SIZE

If you load an original that is not a standard size, or if you wish to change the scanning size, touch the [ORIGINAL]
key and set the original size manually.
Perform the following steps after loading the document in the RSPF or on the document glass.
*Standard sizes:
Note
The following originals sizes will be correctly detected:
• Countries/regions that use inch-based standard sizes:11"x17", 8-1/2"x14", 8-1/2"x11", 8-1/2"x11"R,
• Countries/regions that use AB standard sizes: A3, A4, A4R, A5, A5R*, B4, B5, B5R.
* These sizes can only be automatically detected when the RSPF is used.
If a non-standard size original is loaded (including special sizes), the closest standard size may be displayed, or
the original size may not appear.
1
Touch the [ORIGINAL] key.
300dpi
RESOLUTION
TIFF-G4
FILE FORMAT
AUTO
8½X11
ORIGINAL
2
Touch the [MANUAL] key.
ORIGINAL SIZE
MANUAL
O
DED
2-SIDED
LET
TABLET
ROTATE THE IMAGE 90 D
• If you wish to rotate the original 90
Note
creating an image file, touch the [ROTATE
THE IMAGE 90 DEGREES] checkbox (a
checkmark should appear in the box).
• The [2-SIDED] key and [JOB BUILD] key
do not appear on models that do not have
an RSPF installed.
3
Touch the desired original size key.
ORIGINAL SIZE
AUTO
MANUAL
5 X8
1 /
1 /
5 X8 R
1 /
1 /
8 X11
1 /
2
2
2
2
2
8 X11R
1 /
8 X13
8 X14
1 /
1 /
2
2
2
11X17
INCH
26
The sizes that can be
selected are displayed.
JOB
BUIL
°
[AUTO] is no longer
highlighted. [MANUAL]
and the original size key
OK
you touched are
OK
highlighted.
AB
5-1/2"x8-1/2", 5-1/2"x8-1/2"R*.
If you wish to select an AB size, touch
the [AB
the desired original size key.
ORIGINAL SIZE
AUTO
A5
A5R
B5R
A4
B4
A3
4
Touch the outer [OK] key.
INAL SIZE
MANUAL
5R
B5
4
A4R
3
when
5
The selected size appears in the top
half of the [ORIGINAL] key.
300dpi
RESOLUTION
TIFF-G4
FILE FORMAT
A4
ORIGINAL
Note
INCH] key and then touch
[AB] is highlighted and
AB size keys are
OK
displayed. To return to
MANUAL
the inch size, touch the
OK
B5
[AB INCH] key once
A4R
AB
again.
INCH
You will return to the
initial screen.
OK
Touching the inner [OK]
A4
key in the step above
OK
returns you to step 2.
AB
INCH
You can return to automatic detection by
pressing the [CLEAR ALL] key (
).