Sharp AR-M350 Imager 운영 매뉴얼 - 페이지 20
{카테고리_이름} Sharp AR-M350 Imager에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-M350 Imager 32 페이지. Ar-m280 | ar-m350 | ar-m450 operation manual (for network scanning)
Sharp AR-M350 Imager에 대해서도 마찬가지입니다: 브로셔 및 사양 (11 페이지), 부품 설명서 (30 페이지), 리필 매뉴얼 (8 페이지), 운영 매뉴얼 (40 페이지)
페이지 인쇄
STORING, EDITING, AND CLEARING FROM THE TOUCH PANEL
10
Touch the INDEX key.
E-MAIL
INTERNET
NAME
SHARP CORPORATION
INDEX
ADDRE
KEY NAME
11
Touch an index key.
DIRECT ADDRESS / INDIVIDUAL
INDEX
SELECT THE CUSTOM INDEX WHERE YOU REGISTER THIS ADDRESS.
USER 1
USER 2
USER 3
DO YOU REGISTER THIS ADDRESS AT THE [FREQUENT USE], TOO?
YES
Select one of the upper row of keys (USER 1 through USER
6) to determine the location of the one-touch key when the
GROUP index is displayed instead of the ABC index (refer
to page 7). The lower keys are for selecting whether to
include the one-touch key in the FREQUENT USE index.
If you touch the wrong key, simply touch the correct key.
12
Touch the OK key.
13
Touch the ADDRESS key.
P CORPORATION
ADDRESS
FILE FORMAT
14
Enter the e-mail address of the destination.
Up to 64 characters can be entered.
If you make a mistake, touch the
cursor (n) back one space and then enter the correct
character.
15
Touch the OK key.
You will return to the one-touch key programming screen.
REGISTRATION IS COMPLETED will appear
highlighted to the right of "No.".
NOTE
The "ADDRESS" line only shows 32 digits, regardless of
how many were digits were actually programmed.
18
NEXT
EXIT
OK
USER 4
USER 5
USER 6
NO
The E-mail address entry
screen appears.
key to move the
16
Check the key name.
The characters appearing next to the NAME key will be
displayed in the key. Only the first 18 characters of the
name entered in step 6 will be displayed.
If you need to change the name that will be displayed in
the key, touch the KEY NAME key.
REGISTRATION IS COMPLETED.
E-MAIL
INTERNET-
NAME
SHARP CORPORATION
INDEX
USER 3
ADDRES
KEY NAME
SHARP CORPORATION
17
Check the file format and the compression
mode.
For a Scan to E-mail destination
Initial settings are File type: PDF, Compression mode:
MMR (G4). If you need to change these settings, touch
the FILE FORMAT key. File type selections are PDF, TIFF,
and TIFF-F; and compression mode selections are
NONE, MH (G3), MMR (G4).
ON
INITIAL
DDRESS
FILE FORMAT
PDF / MMR (G4)
For an Internet-Fax destination
The initial setting is Compression mode: MH (G3). If you
need to change the setting, press the COMPRESSION
key. Selections are MH (G3) and MMR (G4).
ON
INITIAL
DDRESS
ON
COMPRESSION
MH (G3)
NOTE
The file format for Internet-Fax is automatically set to TIFF-F.
18
When you have finished programming the one-
touch key, touch the EXIT key
If you wish to program another one-touch key,
touch the NEXT key.
NEXT
EXIT
INITIAL
S
FILE FORMAT
PDF / MMR (G4)
If you do not wish to change
the name, this step is not
necessary.
If you do not need to change
the settings, this step is not
necessary.
S
When you have completed
the settings, press the OK
key.
If you do not need to change
the settings, this step is not
necessary.
S
When you have completed
the settings, press the OK
key.
Pressing the EXIT key
returns you to the screen of
step 4 on the previous page.