Sharp AR-M455U 빠른 참조 매뉴얼 - 페이지 15

{카테고리_이름} Sharp AR-M455U에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-M455U 33 페이지. Digital multifunctional imager

Simulation List (Main/Sub) (cont'd)

Used to set the make time in the FAX pulse dial mode (20pps) and to test the dial signal output. (The dial number signal set by SIM 66-

13 is outputted.) The send level can be set to an optional level. Used to check troubles in dialing and to check the operation. (Only

when FAX is installed.)

Used to check the dial signal (DTMF) output in the FAX tone dial mode. (The dial number signal set by SIM 66-13 is outputted. The

send level can be set to an optional level. Used to check troubles in dialing and to check the operation. (Only when FAX is installed.)

Used to check the dial signal (DTMF) output in the FAX tone dial mode. Send level: Max. Used to check the operation. (Only when

FAX is installed.)

Used to check the dial signal (DTMF) output in the FAX tone dial mode. An output is sent at the send level set by the soft switch. Used

to check the operation. (Only when FAX is installed.)

Used to back-up the HDD data into the Flash memory (optional FAX expansion memory: AR-MM9). (Only when FAX is installed.)

Used to read the back-up data by SIM 66-19 to the SRAM/HDD. (Only when FAX is installed.)

Used to print information related to FAX (various registrations, communication management, file management, system error protocol).

(Only when FAX is installed.)

Used to adjust the handset volume. (Only when the FAX is installed.)

Used to download the FAX program. (Only when FAX is installed.) Not used in the market. (For development.)

Used to clear the FAST memory data. (Only when FAX is installed.)

Used to register the FAX number for Model dial-in. (Only when FAX is installed.) Not used in the market. (For development.)

Quick Reference Guide: AR-M355U/M455U

Simulation List (Pg. 10 of 11)