Sharp AR-M550U 기술 매뉴얼 - 페이지 16

{카테고리_이름} Sharp AR-M550U에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-M550U 48 페이지. Digital multifunctional system
Sharp AR-M550U에 대해서도 마찬가지입니다: 주요 운영자 매뉴얼 (20 페이지)

페이지 인쇄
Sharp AR-M550U 기술 매뉴얼
AR-M550 / AR-M620 / AR-M700 Coin Vend Interface
The coin vend interface for the AR-M550, AR-M620 and AR-M700 machines is located on the
Scanner Control PWB.
Before connecting a third party auditor, the device should conform to the following
specifications:-
1. The auditor interface should be optically isolated from the copier.
2. The external auditor interface should be 'Power Supply Unit' independent.
3. The external auditing device's Power Supply Unit should be a plug-top adapter, not
an internal supply.
4. The external auditing device's plug-top adapter should have a reinforced insulation
barrier.
5. The external auditing device must 'hold' a CE mark.
To enable coin vend function, test command 26-03 and select Vendor Control (set value 2), the
LCD display should now display the message 'Under Vendor Control' when the copier is re-
started. The message will clear and copying will be possible only when the external auditing
device completes the interface's enable loop.
Connector Signals and Functions
Pin #
1
2
3
4
5
6
7
8
9
10
11
12

COIN VEND INTERFACE

Signal Name
24vdc
Maximum current 100mA
P-GND
Ground, connected to pin 3 for 'enable loop'
/CV_COPY
Enables ready status of copier
/CV_COUNT
Paper exit copy signal (Late billing pulse)
/CV_START
Copy start paper feed clutch signal (Early billing
pulse)
/CA_CA
Clear all signal
/CA_STAPLE Staple signal
/CV_DPX
Duplex signal
/CV_SIZE0
Copy paper size indicator
/CV_SIZE1
Copy paper size indicator
/CV_SIZE2
Copy paper size indicator
/CV_SIZE3
Copy paper size indicator
Details
16
February 2005