Sharp AR-M620U 기술 매뉴얼 - 페이지 28

{카테고리_이름} Sharp AR-M620U에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-M620U 48 페이지. Digital multifunctional system
Sharp AR-M620U에 대해서도 마찬가지입니다: 주요 운영자 매뉴얼 (20 페이지)

페이지 인쇄

The following pages contain information regarding test simulations. For a more detailed

description for each test simulation, please refer to the AR-M550/620/700 Service Manual.

Copier Simulation Entry Codes

On the copier operation panel, press the following keys:-

PROGRAM

Test

Command

TEST SIMULATIONS

CLEAR

Sub

Code

Scanner test

Scanner sensor check

DSPF ageing test.

DSPF sensor check

DSPF output check (motor, clutch, solenoid)

Finisher sensor check

Finisher output check (motor, clutch, solenoid)

Finisher adjustment

Inserter sensor check

Inserter load check

Adjust Inserter paper width detection level

LCC sensor check

LCC load check

LCD/LED test

Heater lamp check

Scanner lamp check

Discharge lamp check

Paper feed load check

Fan motors check

Transfer unit check

Paper feed ageing test setting

Interval ageing cycle timer set up

Warm up time display setting

Developer bias setting and output

MHV/Grid setting and output

THV check and adjust ( transfer).

Transfer belt cleaning mode check and adjust

Check and adjust the transfer cleaning roller charge

Check fusing bias voltage

Check and adjust the operation and load test.

Check sensor operation.

Toner motor activation.

Check toner remaining quantity sensor.

Description

February 2005