Sharp AR-NB3 옵션 매뉴얼 - 페이지 9
{카테고리_이름} Sharp AR-NB3에 대한 옵션 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-NB3 44 페이지. Digital copier/printer/multifunctional system option
Sharp AR-NB3에 대해서도 마찬가지입니다: 인쇄 매뉴얼 (41 페이지), 네트워크 스캐너 운영 (40 페이지)
페이지 인쇄
[ 3 ] UNPACKING AND INSTALLATION
1. UNPACKING
2. PACKAGED GOODS
3. INSTALLATION PROCEDURE
Turn off the main switch of the main unit and remove the power
plug of the main unit from the outlet.
1. Cut out the cut-out portions from the rear cabinet.
1) Cut out three cut-out portions from the rear cabinet using a cutter or
the like.
2) Use a Phillips screwdriver or the like to open a hole.
Phillips screwdriver
2. Attach the network expansion kit.
Connect the connector of the network expansion kit to the connector of
the main unit and put excessive harness into the cut-out portion in the
main unit.
Engage the two pawls on the rear of the network expansion kit with the
cut-out portions of the main unit and network expansion kit using the
supplied screw (3 x 14).
3. Connect the USB cable and the network cable.
1) Attach the supplied cable clamp to the position shown in the illustration.
2) Connect the USB cable to the network expansion kit and the main unit.
At this time, reduce slack of the cable with the cable clamp as shown in
the illustration.
3) Connect the network cable.
Insert the power plug of the copier to the outlet, turn the main
switch of the copier to the "ON" position, and perform network set-
ting and installation of the software.
AR-NB3 UNPACKING AND INSTALLATION
3 – 1
Screw (M3x14)
Connector
Pawl
Pawl