Sharp ARM207E - B/W Laser - All-in-One 빠른 참조 매뉴얼 - 페이지 21

{카테고리_이름} Sharp ARM207E - B/W Laser - All-in-One에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp ARM207E - B/W Laser - All-in-One 44 페이지. Ar-m162e | ar-m207e specification sheet
Sharp ARM207E - B/W Laser - All-in-One에 대해서도 마찬가지입니다: 브로셔 및 사양 (6 페이지), 사양 시트 (2 페이지)

페이지 인쇄

Sharp ARM207E - B/W Laser - All-in-One 빠른 참조 매뉴얼

Simulations

Entering the Simulation Mode

Perform the following procedure to enter the simulation mode:

# key → * key → C key → * key →

Main code → Start key → Sub code → Start key

Canceling the Simulation Mode

To cancel the simulation mode, press the CLEAR ALL key.

Important: After canceling the simulation mode, be sure to

turn the power OFF/ON and check the operation.

When the interruption key is pressed, the process is interrupted

and the screen returns to the sub code entering display.

Note 1: If the machine is terminated by a jam error or paper

empty error during copying in the adjustment by the simulation,

recopying is required.

Note 2: The values in the simulation columns are not default

values but sample values.

Quick Reference Guide: AR-M207, M165, M162

List of Simulations

Simulaltions