Sharp BP-21M22 빠른 시작 매뉴얼 - 페이지 19

{카테고리_이름} Sharp BP-21M22에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp BP-21M22 36 페이지.

LOAD PAPER INTO THE TRAY 2 - 4

• If a paper misfeed occurs, turn the paper over and/or around, and reload.

• If the paper is curled, fix the curl before loading the paper.

• Adjust the divider plate so that there is no gap between the paper and divider plate.

• Do not add paper.

• Do not load the paper as shown below.

BEFORE USING THE MACHINE

Pull out the paper tray.

Gently pull the tray out until it stops.

To load paper, go to step 3. To load a different size of paper,

go to the next step.

Adjust guide plates A and B to match

the longitudinal and transversal

dimensions of the paper to be loaded.

The guide plates A and B are slidable. Squeeze the

separator plate lever and slide to the desired paper size.

Insert the paper into the tray.

Load the paper with the print side facing up. The stack must

not be higher than the indicator line (Maximum of 500

sheets).

Gently push the paper tray into the

machine.

Push the tray firmly all the way into the machine slowly.

Forcefully inserting the paper may cause skewed feeding

and paper misfeeds.