Sharp BP-50C45 빠른 시작 매뉴얼 - 페이지 14

{카테고리_이름} Sharp BP-50C45에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp BP-50C45 45 페이지. Digital full colour multifunctional system
Sharp BP-50C45에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (46 페이지)

페이지 인쇄

BEFORE USING THE MACHINE

LOAD PAPER INTO THE TRAY 1 - 4

Loading envelope in tray 1

Load the paper with the copy and print side facing up. The diagram shows an example of printing on the front side.

The maximum number of sheets 50 may not exceed the indicator line.

When loading envelopes in the tray 1, set the paper type.

► CHANGE THE SETTING OF THE PAPER TRAY (page 18)

Pull out the paper tray.

Gently pull the tray out until it stops.

To load paper, go to step 3. To load a different size of

paper, go to the next step.

Adjust guide plates A and B to match

the longitudinal and transversal

dimensions of the paper to be loaded.

• The guide plates A and B are slidable. Squeeze the

separator plate lever and slide to the desired paper size.

Adjust to the non-standard paper size so that the paper

will not be too loose or too tight.

• To load SRA3 paper, the position of the guide must be

adjusted. For details, see the User's Manual.

Insert the paper into the tray.

• Load the paper with the print side facing up. The stack

must not be higher than the indicator line.

• Fan the paper well before loading it. Otherwise, multiple

sheets may feed at once and cause a misfeed.

• After loading the paper, close the guides to the paper

width not to leave the gap from the guides A and B.

Close the tray slowly.

Push the tray firmly all the way into the machine slowly.

Forcefully inserting the paper may cause skewed feeding

and paper misfeeds.