Sharp BP-50C65 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} Sharp BP-50C65에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp BP-50C65 45 페이지. Digital full colour multifunctional system
Sharp BP-50C65에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (46 페이지)

페이지 인쇄

BEFORE USING

THE MACHINE

This section provides general information about the machine, including the names and functions of the parts of the

machine and its peripheral devices, and the procedures for placing originals and loading paper.

PART NAMES AND FUNCTIONS

(11)

(12)

(1)

Automatic document feeder

It automatically feeds and scans multiple originals. 2-sided

originals can be automatically scanned.

(2)

Paper pass unit*

Relay between the machine and the finisher or saddle stitch finisher.

(3)

Toner cover (BP-50C55/50C65/70C55/70C65)

Open to replace a toner cartridge.

(4)

Operation panel

This is used to connect a USB device such as a USB memory

device to the machine.

►

OPERATION PANEL (page 8)

(5)

Main power indicator

This lamp lights up when the machine's main power switch is in

the "

" position.

(6)

Exit tray unit (right tray)

Set so that paper is output into this tray as required.

(7)

Job separator (upper tray)*

Printed papers are delivered to this tray.

(8)

Output tray*

Output is delivered to this tray.

(9)

Folding unit*

This folds and outputs paper.

(10)

Inner finisher*

This staples paper. A punch module can also be installed to

punch holes in output paper.

You can also perform stapling manually.

(11)

Finisher

This staples paper. A punch module can also be installed to

punch holes in output paper.

(12)

Saddle Stitch Finisher*

This staples and folds paper. A punch module can also be

installed to punch holes in output paper.

(13)

Finisher (large stacker)*

This staples paper. A punch module can also be installed to

punch holes in output paper.

You can also perform stapling manually.

* Peripheral device. For more information, see the User's Manual.

Depending on the country, region, and model, it may be standard equipment, a peripheral device, or may not be available. Contact your dealer or

nearest authorised service representative.

(13)

(14)

(15) (16) (17) (18)

(1)

(2) (3)

(4)

(5)

(6)

(19) (20) (21)

(14)

Saddle Stitch Finisher (large stacker)*

This staples and folds paper. A punch module can also be

installed to punch holes in output paper.

You can also perform stapling manually.

(15)

Tray 1

Store paper in this tray. A maximum of 550 sheets (80 g/m

lbs.)) of paper can be loaded.

(16)

Tray 2 (when a stand/550/2x550/3x550/550&2100 sheet

paper drawer is installed)*

Store paper in this tray. A maximum of 550 sheets (80 g/m

lbs.)) of paper can be loaded.

(17)

Tray 3 (when a stand/2x550/3x550 sheet paper drawer is installed)*

Store paper in this tray. A maximum of 550 sheets (80 g/m

lbs.)) of paper can be loaded.

(18)

Tray 4 (when a stand/3x550 sheet paper drawer is installed)*

Store paper in this tray. A maximum of 550 sheets (80 g/m

lbs.)) of paper can be loaded.

(19)

Front cover

(BP-50C26/50C31/50C36/50C45/70C31/70C36/70C45)

Open this cover to switch the main power switch to "On" or "Off"

to replace a toner cartridge.

(20)

Bypass tray

Use this tray to feed paper manually.

When loading paper larger than A4R or 8-1/2" x 11"R, pull out

the extension guide.

►

Bypass tray (page 15)

(21)

Tray 5 (when a large capacity tray is installed)*

Store paper in this tray. A maximum of 3000 sheets (80 g/m

lbs.)) of paper can be loaded.

(22)

Tray 3 (when a stand/550&2100 sheet paper drawer is installed)*

Store paper in this tray. A maximum of 1200 sheets (80 g/m

lbs.)) of paper can be loaded.

(23)

Tray 4 (when a stand/550&2100 sheet paper drawer is installed)*

Store paper in this tray. A maximum of 900 sheets (80 g/m

lbs.)) of paper can be loaded.

(7)

(8)

(9)(10)

(22)

(23)

(20