Sharp DX-C200 빠른 매뉴얼 - 페이지 12

{카테고리_이름} Sharp DX-C200에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp DX-C200 44 페이지. Digital full colour multifunctional system
Sharp DX-C200에 대해서도 마찬가지입니다: 사양 (2 페이지)

페이지 인쇄
Sharp DX-C200 빠른 매뉴얼
Using the Scanner Function

Initial Screen and Basic Operation

The following is the initial screen in scanner mode.
1
2
3
• When "Specify Dest." is displayed:
Scan to E-mail, Scan to FTP, or Scan to Folder functions can be used.
• When "Save Scn Data to USB" is displayed:
A USB fl ash disk is inserted in the machine, and the Scan to USB function can
be used.
•
If a USB fl ash disk is inserted in the machine, scanning operations other than Scan to USB
are disabled on the control panel.
•
Scan to E-mail, Scan to FTP, and Scan to Folder destinations must be registered using
Web Image Monitor in advance (the Scan to USB function does not require destinations
registered). For details, see "Using the Scanner Function", User Guide.
•
To send fi les via e-mail, SMTP and DNS settings must be confi gured properly in advance.
For details, see "Confi guring the Machine Using Web Image Monitor", User Guide.
•
It is recommended that you call the receiver and confi rm with them when sending important
documents.
•
Certain types of USB fl ash disks cannot be used for the Scan to USB function.
•
The original in the ADF takes precedence over the original on the exposure glass if you
place originals both in the ADF and on the exposure glass.
❖ Basic Operation for Scan to E-mail/FTP/Folder
Press the [Scanner] key.
Confi rm that "Specify Dest." is shown on
the screen.
12
1. Current status or messages
2. Current scanning mode and settings
3. Selection key items
CES251
CES175