Sharp DX-C200 빠른 매뉴얼 - 페이지 17
{카테고리_이름} Sharp DX-C200에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp DX-C200 44 페이지. Digital full colour multifunctional system
Sharp DX-C200에 대해서도 마찬가지입니다: 사양 (2 페이지)
페이지 인쇄
Press the appropriate selection key for the desired fi le for-
mat.
Depending on the machine's settings, you
may see the screen on the right on the
display when scanning from the exposure
glass. If you see this screen, proceed to
step 6. If not, proceed to step 8.
If you have more originals to scan, place the next original on the
exposure glass, and then press [Yes]. Repeat this step until all
originals are scanned.
When all originals have been scanned, press [No] to start sending
the scanned fi le.
Confi rm that "Ready" appears on the display.
The scanned fi le is created in the root directory of the USB fl ash disk.
Remove the USB fl ash disk from the machine.
•
To cancel scanning, press the [Scanner] key, and then press the [Clear/Stop] key. The scan
fi les are discarded.
•
You can confi gure the machine to perform black-and-white scanning in halftone or grayscale
by changing the machine's default settings. For details, see "Confi guring the Machine Using
the Control Panel", User Guide.
•
If paper is jammed in the ADF, the scan job will be put on hold. To resume the current job,
remove the jammed paper and scan the originals again starting from the jammed page.
•
You can also specify a destination using the One Touch buttons or [Pause/Redial] key. For
details, see "Using the Scanner Function", User Guide.
•
For information about originals, see "Getting Started",
•
For information about removing jammed paper, see "Removing Paper Jams" on page 29.
User Guide.
17