Sharp DX-C200 빠른 매뉴얼 - 페이지 39

{카테고리_이름} Sharp DX-C200에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp DX-C200 44 페이지. Digital full colour multifunctional system
Sharp DX-C200에 대해서도 마찬가지입니다: 사양 (2 페이지)

Sharp DX-C200 빠른 매뉴얼
When removing print cartridges, be careful not to touch
the Laser Scanning Unit on the underside of the upper
cover (the position shown by the arrow in the illustra-
tion).
If cyan, magenta, or yellow toner runs out, you can print in black and white using just the black
toner. Change the color mode setting to Black and White using the machine's driver.
If black toner runs out, you cannot print in black and white or color until the black print car-
tridge is replaced.
Pull up the lever on the top cover,
and then carefully raise the top
cover.
Make sure that the ADF is closed.
Carefully lift out the print cartridge
vertically, holding its center.
• Do not shake the removed print cartridge.
Doing so can cause remaining toner to
leak.
• Place the old print cartridge on paper
or similar material to avoid dirtying your
workspace.
• The toner color is indicated by the label
on each print cartridge.
CES137
CES138
CES408
39