Sharp FO-2150CM 설정 매뉴얼 - 페이지 5

{카테고리_이름} Sharp FO-2150CM에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp FO-2150CM 32 페이지. Color mfp
Sharp FO-2150CM에 대해서도 마찬가지입니다: 기술 매뉴얼 (26 페이지)

Connections

Parallel cable

Connect the Sharp Color MFP to your computer with a parallel cable.

If you do not have a parallel cable, you can purchase one from

your dealer or any computer store.

Make sure the cable is IEEE 1284-compliant. We recommend a

shielded cable no longer than 2 meters.

Make sure your computer is turned off

and the Sharp Color MFP is

unplugged.

Connect one end of the cable to the

port on the Sharp Color MFP. Snap

the clips on each side of the port onto

the cable connector to secure it.

Connect the other end of the cable to

the parallel port on the back of your

computer.

Note: The parallel port mode of your computer must be set to Nibble mode

or an equivalent mode such as Compatible, PS/2, Standard, Normal or Tra-

ditional mode. Note that ECP, EPP, Byte, and Bidirectional modes may not

allow correct operation. To check or change the parallel port mode, run

your computer's setup (BIOS) program after powering on your computer.

(Refer to your computer documentation for more information).