Sharp M160D 운영 매뉴얼 - 페이지 21

{카테고리_이름} Sharp M160D에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp M160D 32 페이지. Digital multifunctional system manual for printer and scanner

Sharp M160D 운영 매뉴얼

SCANNING USING THE KEYS ON THE MACHINE

The procedure for scanning using the [SCAN] key is explained in the following. When scanning is performed by this method,
the previously specified application will automatically start and the scanned image will be acquired into the application.
• Scanner mode cannot be used in the following situations:
Note
• A problem has occurred in the machine such as a paper misfeed or an open cover.
• The system settings are being used.
• The tray paper size is being set.
• During copying or printing
• During scanning of an original for a fax transmission (when the fax option is installed)
• If the machine is in copy mode, press the [SCAN] key to switch to scanner mode and clear the previously set
copy settings.
1
Place the original(s) that you wish to scan
on the document glass or in the SPF.
For information on how to place the original, see
"4. COPY FUNCTIONS" in the "Operation
manual (for general information and copier)".
2
Press the [SCAN] key.
ON LINE
PRINT
DATA
SCAN
LINE
FAX
DATA
The [SCAN] key indicator lights up to indicate that the
machine is in scanner mode and the destination
selection screen appears in the display. A name can
be entered in Button Manager for each of the
destinations "SC1:" to "SC6:", which will appear in the
format "SC1:XXXXX".
3
Use the [ ] or [ ] key to select the
desired scan destination.
PQ
UPLEX
LEX SCAN
LEX SCAN
ACC
The following applications have been set at the factory
for each of the scan destinations 1 to 6.
If you wish to change a setting, see
MANAGER SETTINGS" (page
Scan Destination
SC1:
SC2:
SC3:
SC4:
SC5:
SC6:
20
DESTINATION SELECT
SC1:
SC2:
SC3:
SC4:
"BUTTON
22).
Application that starts
Sharpdesk
Email
FAX
OCR
Microsoft Word
Filing
4
Press the [OK] key.
GHI
BACK
OK
PQRS
X
AN
The selected destination
appears.
5
Press the [START] key.
MNO
Scanning begins.
WXYZ
@.- _
AD-END
• The [COPY] key, [PRINT] key, or [FAX]
Note
key can be pressed in scanner mode to
switch to the corresponding mode.
• For restrictions on using copy, printer, or
fax mode while in scanner mode, or using
scanner mode while in copy, printer, or fax
mode, see "OPERATION IN COPY,
PRINT, SCAN, AND FAX MODES" in "1.
BEFORE USING THE PRODUCT" in the
"Operation manual (for general
information and copier)".
Ready to scan.
SC2: