Sharp MX 5500N - Color Laser - Copier 문제 해결 매뉴얼 - 페이지 29
{카테고리_이름} Sharp MX 5500N - Color Laser - Copier에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp MX 5500N - Color Laser - Copier 48 페이지. Digital full colour multifunctional system
Sharp MX 5500N - Color Laser - Copier에 대해서도 마찬가지입니다: 브로셔 및 사양 (12 페이지), 사용 설명서 지침 (14 페이지), 매뉴얼 (49 페이지), 안전 매뉴얼 (28 페이지)
페이지 인쇄
Problem
JPEG was selected for
the file type but the file
was created as a TIFF
file.
The image is too light
or too dark.
(When using PC
Scan.)
Point to check
Did you press the [BLACK & WHITE
START] key (
) to begin scanning?
Is the threshold value suitable?
Are the brightness and contrast settings
suitable?
Solution
When [JPEG] is selected for the file type and the image
is scanned in Mono 2, the file will be created as a TIFF
file. To create the file as a JPEG file, change the colour
mode to [Full Colour] and then press the [COLOUR
START] key (
).
When scanning from the TWAIN driver with [Mono 2
gradation] selected from the [Colour Mode] of the
"Professional" window, check the "B/W Threshold"
setting. A large threshold value makes the image darker
and a small threshold value makes the image brighter.
To adjust the "B/W Threshold" automatically, click the
[Auto Threshold] button on the [Image] tab of the
"Professional" window.
When the brightness and contrast settings are not
suitable (for example, the scanned image is too bright),
click the [Auto Brightness / Contrast Adjustment] button
on the [Colour] tab of the "Professional" window. You
can also click the [Brightness / Contrast] button to set
the brightness and contrast while viewing the scanned
image.
27