Sharp MX-2300N Guide 문제 해결 매뉴얼 - 페이지 10
{카테고리_이름} Sharp MX-2300N Guide에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp MX-2300N Guide 44 페이지. Sharp mx-2700n, mx-2300n mfp - scan to e-mail instructions
Sharp MX-2300N Guide에 대해서도 마찬가지입니다: 사양 (2 페이지), 안전 매뉴얼 (28 페이지), 문서 제출 매뉴얼 (47 페이지), 스캔하여 이메일 지침 (7 페이지), 소프트웨어 설정 매뉴얼 (48 페이지)
페이지 인쇄
Problem
Image rotation does
not take place.
Two-sided copying
does not take place.
The paper size of a
tray cannot be set.
8
Point to check
Did you select the paper size or copy
ratio manually?
Is "Rotation Copy Setting" disabled in
the system settings (administrator)?
Does the paper type setting of the
selected tray specify a type of paper that
cannot be used for two-sided copying?
Are you using a special size or type of
paper?
Are you copying using settings that do
not allow two-sided copying?
Have functions been disabled by the
administrator?
Have functions been disabled by the
administrator?
Solution
Copy using automatic paper selection and automatic
ratio selection.
Check with your administrator.
If you are the administrator, enable "Rotation Copy
Setting".
➞ System Settings (Administrator) > "Copy Settings" >
"Rotation Copy Setting" >
Check "Tray Settings" in the system settings. If the
[Disable Duplex] checkbox is selected
copying using that tray will not be possible. Change the
paper type setting to a type that can be used for
two-sided printing.
➞ System Settings > "Paper Tray Settings" > "Tray
Settings"
Two-sided copying is not possible on paper that is a
special type or size.
The only type of paper that can be used is plain paper
2
2
(60 g/m
to 105 g/m
(16 lbs. to 28 lbs.)). Paper sizes
that can be used are A3, B4, A4, A4R, B5, B5R, and
A5R (11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11",
8-1/2" x 11"R, 5-1/2" x 8-1/2"R, 8K, 16K, and 16KR).
Two-sided copying can generally be combined with
other special modes, however, some combinations are
not possible. If a prohibited combination is selected, a
message will appear in the touch panel.
Some functions may have been disabled in the system
settings (administrator). Check with your administrator.
When user authentication is enabled, the functions that
you can use may be restricted in your user settings.
Check with your administrator.
Some functions may have been disabled in the system
settings (administrator). Check with your administrator.
, two-sided