Sharp MX-2300N Guide 안전 매뉴얼 - 페이지 22

{카테고리_이름} Sharp MX-2300N Guide에 대한 안전 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp MX-2300N Guide 28 페이지. Sharp mx-2700n, mx-2300n mfp - scan to e-mail instructions
Sharp MX-2300N Guide에 대해서도 마찬가지입니다: 사양 (2 페이지), 문제 해결 매뉴얼 (44 페이지), 문서 제출 매뉴얼 (47 페이지), 스캔하여 이메일 지침 (7 페이지), 소프트웨어 설정 매뉴얼 (48 페이지)

페이지 인쇄

TO THE ADMINISTRATOR OF THE

MACHINE

(Separate this page from the manual and keep it in a safe place.)

Factory default passwords

When accessing the system settings, the administrator password is required to log in with administrator

rights. The system settings can be configured in the Web pages as well as on the operation panel. To

access the system settings using the Web pages, a password is also required.

Factory default administrator password

Factory default setting: admin

Store a new administrator password as soon as the machine is installed.

Once the administrator password has been changed, the new password is required to restore the factory

default password. Take care to remember the new password.

Factory default passwords (Web pages)

There are two factory default accounts: "Administrator" and "User". A person who logs in as an

"Administrator" can configure all settings in the Web pages. A person who logs in as a "User" can only

configure certain settings.

The factory default passwords are shown below.

User

Administrator

Forwarding all transmitted and received data to the administrator

(document administration function)

This function is used to forward all data transmitted and received by the machine to a specified destination

(Scan to E-mail address, Scan to FTP destination, Scan to Network Folder destination, or Scan to Desktop

destination).

This function can be used by the administrator of the machine to archive all transmitted and received data.

To configure the document administration settings, click [Application Settings] and then [Document

Administration Function] in the Web page menu. (Administrator rights are required.)

Note:

• This function can be used only when the network scanner function is installed.

• The format, exposure, and resolution settings of transmitted and received data remain in effect when the data is

forwarded.

• The functions below cannot be used when transmitted faxes are forwarded. In this case, the [Memory TX] key and

[Direct TX] key do not appear.

Quick Online transmission, direct transmission, dialling using the speaker

Factory default account

users

admin

Factory default password

users

admin