Sharp MX-2300N Guide 소프트웨어 설정 매뉴얼 - 페이지 31
{카테고리_이름} Sharp MX-2300N Guide에 대한 소프트웨어 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp MX-2300N Guide 48 페이지. Sharp mx-2700n, mx-2300n mfp - scan to e-mail instructions
Sharp MX-2300N Guide에 대해서도 마찬가지입니다: 사양 (2 페이지), 문제 해결 매뉴얼 (44 페이지), 안전 매뉴얼 (28 페이지), 문서 제출 매뉴얼 (47 페이지), 스캔하여 이메일 지침 (7 페이지)
페이지 인쇄
9
Click the [Close] button in the window
of step 6.
After the installation, a message prompting you to
restart your computer may appear. If this message
appears, click the [Yes] button to restart your
computer.
This completes the installation. Next, configure the
IP address of the machine in the scanner driver.
When the scanner driver is installed, the "Select Device"
utility is also installed.
The IP address of the machine is configured in the
scanner driver using "Select Device".
10
Click the [start] button, select [All
Programs] ([Programs] in versions of
Windows other than Windows
XP/Server 2003), select [SHARP MFP
TWAIN K], and then select [Select
Device].
11
Click the [Add] button.
INSTALLING THE SCANNER DRIVER
12
Select the IP address of the machine
from the "Address" menu and click the
[OK] button.
• Be sure to ask your system administrator (network
administrator) for the IP address of the machine.
• The name (host name) or IP address of the machine
can be directly entered in "Address".
• If the port number used by the scanner function of the
machine has been changed, enter a colon ":" following
the IP address and then enter the port number.
(Normally the port number does not need to be
entered.)
13
Click the [OK] button.
This completes the configuration of the scanner
driver.
29