Sharp MX-2614N Operation 설치 매뉴얼 - 페이지 3
{카테고리_이름} Sharp MX-2614N Operation에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp MX-2614N Operation 19 페이지. Digital full color
multifunctional system
Sharp MX-2614N Operation에 대해서도 마찬가지입니다: 수동 시작 (16 페이지), 사양 (13 페이지), 빠른 매뉴얼 (12 페이지)
페이지 인쇄
Humidity RH
85%
60%
20%
Operational environment
Temperature: 10 to 35 C
Humidity: 20 to 85% RH
Atmospheric pressure: 590 to 1013hPa (altitude: 0 to 2000 m)
(2) Contaminates
If dust enters the machine, it may cause dirty copy and a paper
jam, resulting in a shortened lifetime.
(3) Direct sunlight
If the machine is installed under the rays of the sun, the exterior of
the machine may be discolored and abnormal copies may be pro-
duced.
(4) Gases and chemicals
Do not install the machine at a place where there are gases and
chemicals. Especially be careful to avoid installation near a diazo-
type copier, which produces ammonium gas.
Copy quality may be adversely affected and a trouble may be
caused.
(5) Vibration
Avoid installation near a machine which produces vibrations.
If vibrations are applied to the copier machine, copy images may be
deflected and a trouble may be caused.
MX-3114N Transit, Installation (using) environment, Note - ii
F. Note for handling PWB and electronic parts
When handling the PWB and the electronic parts, be sure to
observe the following precautions in order to prevent against dam-
age by static electricity.
• When in transit or storing, put the parts in an anti-static bag or an
anti-static case and do not touch them with bare hands.
• When and after removing the parts from an anti-static bag (case),
use an earth band as shown below:
• Put an earth band to your arm, and connect it to the machine.
• When repairing or replacing an electronic part, perform the
procedure on an anti-static mat.