Sharp MX-2640N 빠른 시작 매뉴얼 - 페이지 13

{카테고리_이름} Sharp MX-2640N에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp MX-2640N 28 페이지. Digital full color multifunctional system
Sharp MX-2640N에 대해서도 마찬가지입니다: 사양 (2 페이지), 빠른 매뉴얼 (2 페이지), 브로셔 및 사양 (8 페이지), 설치 매뉴얼 (20 페이지), 빠른 매뉴얼 (2 페이지), 빠른 매뉴얼 (12 페이지)

페이지 인쇄

TURNING THE POWER ON AND OFF

This machine has a main power switch, found at the bottom left after the front cover is opened, and a power button (

Turning on the power

• Switch the main power switch to the " " position.

• After the main power indicator lights in green, press the power button (

Turning off the power

(1) Press the power button (

) to turn off the power.

(2) Switch the main power switch to the " " position.

Restarting the machine

In order for some settings to take effect, the machine must be restarted. If a message in the

touch panel prompts you to restart the machine, press the power button (

power and then press the key again to turn the power back on.

CAUTION

• When turning off the power, make sure that the indicators on the operation panel

turn off as well.

• If the machine suddenly turns off, such as in the event of a power failure, turn the

machine on again, and then turn off the machine following the correct procedure for

turning off the machine.

Switching off the main power switch or removing the power cord from the outlet

while any of the indicators are lit or blinking may damage the hard drive and cause

data to be lost.

• Switch off both the power button (

power cord if you suspect a machine failure, if there is a bad thunderstorm nearby,

or when you are moving the machine.

) to turn off the

) and the main power switch and unplug the

), located on the operation panel.

Power button

Main power switch

• When using the fax or Internet fax function, always keep the main power switch

in the " " position.

• In some states of the machine, pressing the power button (

make the settings take effect. In this case, use the main power switch to switch

the power off and then on.

Main power indicator

) to restart will not