Sharp X-M200DK 설치 매뉴얼 - 페이지 10

{카테고리_이름} Sharp X-M200DK에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp X-M200DK 38 페이지. Digital multifunctional system

5) Attach the right cabinet.

Reattach the right cabinet to its original position and fix it with the

screws.

6) Cut out the cut-out portion.

Cut out the cut-out portion of the rear cabinet with nippers or the like.

At this time, be careful about the orientation of the nippers so that the

cut plane of the rear cabinet is flat.

7) Attach the automatic document feeder.

Insert the hinge portions of the document feeder into the mounting por-

tions of the copier by holding the feeder at an angle toward the rear

side.

8) Connect the relay connector.

Connect the harness of the automatic document feeder to the connec-

tor of the copier and tighten the screws on the connector.

9) Remove the filament tape.

Remove the filament tape located in the positions shown in the illustra-

tion.

AR-SP10/AR-RP10 4 - 2