Sharp X-M200DK 설치 매뉴얼 - 페이지 2
{카테고리_이름} Sharp X-M200DK에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp X-M200DK 38 페이지. Digital multifunctional system
페이지 인쇄
CAUTION
This product is a class 1 laser product that complies with 21CFR 1040.10 and 1040.11 of the CDRH standard and IEC60825-1 Edition 1.2-2001.
This means that this machine does not produce hazardous laser radiation. The use of controls, adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
This laser radiation is not a danger to the skin, but when an exact focusing of the laser beam is achieved on the eye's retina, there is the danger of
spot damage to the retina.
The following cautions must be observed to avoid exposure of the laser beam to your eyes at the time of servicing.
1) When a problem in the laser optical unit has occurred, the whole optical unit must be exchanged as a unit, not as individual parts.
2) Do not look into the machine with the main switch turned on after removing the developer unit, toner cartridge, and drum cartridge.
Do not look into the laser beam exposure slit of the laser optical unit with the connector connected when removing and installing the optical
3)
system.
4) The middle frame contains the safety interlock switch.
Do not defeat the safety interlock by inserting wedges or other items into the switch slot.
Warning:
This is a Cla
ss A product. In a domestic environment this product may cause radio interference in which case
the user may be required to take adequate measures.
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
Disconnect the AC cord before servicing the unit.
LASER WAVE - LENGTH: 785 nm + 10 nm/ 15 nm
Pulse times : (8.141 s 0.1 s/7 mm
Output power : 0.14 mW 0.22 mW