Sharp SJ-4122M 운영 매뉴얼 - 페이지 5

{카테고리_이름} Sharp SJ-4122M에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp SJ-4122M 24 페이지.

페이지 인쇄

Installation

Keep adequate ventilation space around the

refrigerator.

The picture shows the minimum required space for

installing the refrigerator. The measurement condition

of energy consumption is conducted under a different

space dimension.

60mm

or more

Rear clearance

The space between the rear of the refrigerator and the

wall should be 50mm or more, and less than 75mm. If

the space is wider than 75mm, you may get injured by

touching compressor and its peripheral parts which are

extremely hot during the operation.

Note

• By keeping greater space, the refrigerator may consume

a less amount of power consumption.

• If use the refrigerator in the smaller space dimension

than gured, it may cause temperature rise in the unit,

loud noise and failure.

• Do not push the refrigerator against the wall. The wall

surrounding the refrigerator may get dirty or discolored

because of the air ow caused by heat radiation.

Overall space required in use

SJ-3822M

SJ-FTS11BVS

1073mm

1254mm

90mm

or more

60mm

or more

SJ-4122M

SJ-4422M

SJ-FTS13BVS

1073mm

1295mm

Use the adjustable foot to place the refrigerator atly

and rmly on the oor.

Adjustable

foot

Note

• Place your refrigerator to access the plug.

• Keep your refrigerator out of direct sunlight and do not

place next to heat generating appliance.

• Do not use shipping materials as a stand.

Place the refrigerator on a hard oor, not directly on the

earthen oor.

In the case of placing the refrigerator on the earthen

oor, use an appropriate base such as a wooden board

under the refrigerator.

Before using your refrigerator

• Clean the inside parts with a cloth soaked in warm

water.

If soapy water is used, wipe it off thoroughly with water.

• Remove packing materials (cushion, blue tapes etc.).

Free standing type

EN-3