AccuTemp XLR8 설치 및 운영자 매뉴얼 - 페이지 12

{카테고리_이름} AccuTemp XLR8에 대한 설치 및 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AccuTemp XLR8 13 페이지. Upper heated platen

5. PLANNED MAINTENANCE CHECKLIST

It is recommended that you contact your AccuTemp authorized service provider to setup a planned

maintenance program to keep your equipment operating in the most efficient manner. AccuTemp

recommends a minimum of a yearly schedule.

PM TASK DESCRIPTION

Verify that the equipment is level and properly located under the

hood.

Verify that the temperature controller is working properly and

that there are no rips in the label.

Inspect the control compartment for foreign particulate and any

loose wiring or connections.

Check that the power supply cord is not frayed, outer covering

is not degraded or any bare cooper is visible. Replace if required.

Verify amp draw to listed amp requirements on the data tag of

the equipment.

Verify mounting fasteners are in place and tight. If not correct. If

the stand has casters check that the wheels are intact and that

they are mounted correctly. If grease covered clean with a mild

detergent and clean water. Dry completely. Apply a food grade

silicone to the locking mechanism.

After all metallic areas are cool to the touch, clean external

metal surfaces except the cooking surface. With a damp clean

towel saturated with a mild detergent and clean water. Dry with

a clean dry towel.

SP8144-2011

XLR8 Installation & Operation Manual

Daily

Biannual

Yearly