Crestron CEN-SWPOE-16 매뉴얼에서
{카테고리_이름} Crestron CEN-SWPOE-16에 대한 매뉴얼에서을 온라인으로 검색하거나 PDF를 다운로드하세요. Crestron CEN-SWPOE-16 2 페이지. 16-port managed poe switch
Crestron CEN-SWPOE-16에 대해서도 마찬가지입니다: 빠른 시작 (4 페이지)
페이지 인쇄
DO
GUIDE
CEN-SWPOE-16
16-Port Managed PoE Switch
DO
Install the Device
The Crestron
®
CEN-SWPOE-16 can be mounted into a rack or placed onto a flat surface.
Mounting into a Rack
The CEN-SWPOE-16 occupies 1U of rack space. Using a #1 or #2 Phillips screwdriver, attach
the two included rack ears to the device and then mount the device into the rack using four
mounting screws (not included).
Placing onto a Flat Surface
When placing the device onto a flat surface or stacking it with other equipment, attach the
included feet near the corners on the underside of the device.
DO
Check the Box
QTY PRODUCT
2
Bracket, Rack Ear, 1U
1
Power Cord, 6'7" (2 m)
4
Foot, 0.5" x 0.5" x 0.23", Adhesive
1
Cable, USB 2.0, A - B, 6' (1.83m)
DO
Connect the Device
Make connections to the CEN-SWPOE-16 using Crestron power supplies for Crestron
equipment.
CEN-SWPOE-16 Front Panel Connections
COMPUTER:
To computer console
CEN-SWPOE-16 Rear Panel Connections
1-16:
To PoE or non-PoE
network devices
NOTE:
Ensure that the unit is properly grounded by connecting the chassis ground lug to an
earth ground (building steel).
NOTE:
To prevent overheating, do not operate this product in an area that exceeds the
environmental temperature range listed in the device's table of specifications on the Crestron
website.
Configure the Device
DO
The CEN-SWPOE-16 provides a web-based configuration utility. For more information about
configuring the CEN-SWPOE-16, refer to the CEN-SWPOE-16 Supplemental Guide (Doc. 7408)
at www.crestron.com/manuals.
COLOR
PART NUM.
2032122
4505164
Black
2002389
2014966
100–240 V, 50/60 Hz:
Power from line voltage
Ground