Sharp SJ-PV50H-G 운영 매뉴얼 - 페이지 6
{카테고리_이름} Sharp SJ-PV50H-G에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp SJ-PV50H-G 40 페이지. Refrigerator-freezer
Sharp SJ-PV50H-G에 대해서도 마찬가지입니다: 운영 매뉴얼 (36 페이지)
페이지 인쇄
Before using your refrigerator
1
Clean the inside parts with a
cloth soaked in warm water.
If soapy water is used, wipe it off
thoroughly.
2
Insert the power plug.
Current: 220 ~ 240V
Cord facing down
Insert securely
3
Adjust the clock of the LCD panel.
Adjusting the clock
* First set the clock even after a power failure or removing the power plug.
1
Turn the dial to set the hour.
AM
3
Turn the dial to set the minutes.
AM
"--:--" will be displayed when not setting the time within 1 minute after inserting the power plug.
Errors cannot be corrected by returning to a previous step when setting the time.
Perform steps 1 ~ 4 and set the time again.
28
Clockwise:
AM0 AM1 AM2
Counterclockwise:
AM0 PM11 PM10
Clockwise:
00 01 02
Counterclockwise:
00 59 58
Notes
The interior compartments of the refrigerator may become
hot when transporting in the case of hot weather.
Before turning on the power, cool the compartments by
opening the doors.
Electronic tones will sound when turning on the power with
the doors open. However, the tones will stop when the doors
are closed and operation will start momentarily.
Loud noise may be noticed at first; however, this is not a
malfunction.
The noise will soften as the compartments cool.
2
Press "CHOOSE/START".
(Beep)
4
Press "CHOOSE/START".
(Beep)
Notes
(Time Setting 46 page)