Sharp SJG2351FS 사용 설명서 및 설치 지침 - 페이지 10

{카테고리_이름} Sharp SJG2351FS에 대한 사용 설명서 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp SJG2351FS 20 페이지.

INSTALLATION INSTRUCTIONS

CONNECTING THE WATER LINE

TO A DRINKABLE WATER SOURCE

If your water line is NOT drinkable, please add an external

water filter.

If you must repair or disassemble the water line, cut off the

plastic tubing to make sure you get a snug, leak-free connection.

INSTALLING DOOR HANDLES

Precautions shall be taken to prevent fall of the handle from

causing any personal injury.

List of tools to be provided by the user

Phillips screwdriver

Inner hexagon spanner

INSTALLATION PROCEDURES

1. Take out bolt 1 from accessory bag, then use Phillips

screwdriver to fix the bolt 1 into the bolt hole 2 of

refrigerator doors. See Figure 8.

2. Put the handle on the door through the bolt 1 and make sure

the handle contact the door surface closely. See Figure 9.

3. Fix the handle by rotating the handle screw 3 to the end, then

to shake the handle for verifying if it already be fixed tightly.

4. Put the cap 4 on the handle screw hole to complete this

installation.

Figure 8

Notes:

1 Bolt

2 Bolt hole

BEFORE USING THE REFRIGERATOR

• Before use, remove all packing materials, including bottom

cushions, foam pads and tapes inside of the refrigerator; tear

off the protective film on the doors and the refrigerator body.

• Before turning the refrigerator on, keep the refrigerator still

for two hours before connecting it to power supply.

• Before putting any fresh or frozen foods, the refrigerator shall

have run for 2-3 hours, or for above 4 hours in summer when

the ambient temperature is high.

Figure 9

3 Handle screw

4 Screw hole cap