Digital Acoustics IP7-SS20 참조 매뉴얼 - 페이지 9
{카테고리_이름} Digital Acoustics IP7-SS20에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Acoustics IP7-SS20 20 페이지. Ip paging amplifier
Digital Acoustics IP7-SS20에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (4 페이지)
페이지 인쇄LED Indicators
LEDs
There are four LEDs present on the curved bezel on the front of the
product.
The blue LED indicates that the IP7-SS20 has powered up.
The three red LEDs indicate status of the unit.
LED
Ready
Link
Active
LED Status Table
Description
Normal operational mode. Unit can
communicate with its Server
Playing Audio
Playing Broadcast Audio
Attempting to connect to make a
connection or unit has not been
configured
LAN connection is inactive. The RJ45 may
be unplugged
Unit has been detected by the
Talkmaster Configuration Tool
LAN Connector LEDs
On the Ethernet 10/100 RJ-45 connector:
The Green LED tracks to the Ready LED
The Yellow LED tracks to the Link LED
Connecting to an Ethernet Network
The Ethernet 10/100 connector allows the unit to be attached to a
10/100 network.
Description
Indicates whether the unit has connected to a Server
Indicates whether the unit has a valid network Connection
Indicates when audio is being received
Ready
Link
On
On
On
On
Fast Flash
On
Flashing
On
Flashing
Off
Fast Flash
On
6
Activity
Off
Flashing
Flashing