Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector 운영 매뉴얼 - 페이지 3
{카테고리_이름} Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector 47 페이지. Colour inkjet printer
Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector에 대해서도 마찬가지입니다: 운영 매뉴얼 (49 페이지), 운영 매뉴얼 (49 페이지), 기본 정보 및 준비 사항 (10 페이지)
페이지 인쇄
Cautions
Follow the cautions below when using this unit.
The unit is affected by the environment in which it is installed. Do not install your unit
in the following area.
Dusty areas
If dust enters the internal parts of the unit, damage or poor-quality output can
result.
Areas in direct sunlight
Direct sunlight can distort the plastic parts of the unit and result in poor-quality
output.
Excessively hot, cold, humid, or dry areas (for example, near heaters, humidifiers,
or air conditioners)
This may result in damp paper, condensation within the internal mechanisms,
misfeeds, and dirty output.
Operating Conditions
Temperature : 10-35 degrees Celsius (50-95 degrees Fahrenheit)
Relative humidity : 20%-85%
Note : When the temperature reaches 30 degrees Celsius (86 degrees Fahrenheit),
the relative humidity must be 60% or less.
The power outlet should be installed near the equipment, and should be easily
accessible.
When moving the unit, be sure to first turn the power switch off, and then remove the
power cord from the outlet.
Place the unit on a firm, level surface.
Be sure to use only ink tanks of SHARP genuine supplies.
If you get ink spots on your skin, wash them with water as soon as possible.
Store the spare ink tanks out of the reach of children.