Sharp Notevision PG-D3550W 설정 매뉴얼 - 페이지 16
{카테고리_이름} Sharp Notevision PG-D3550W에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Notevision PG-D3550W 26 페이지. True wxga data projectors and short-throw true wxga data projector
Sharp Notevision PG-D3550W에 대해서도 마찬가지입니다: 운영 매뉴얼 (9 페이지), 빠른 매뉴얼 (2 페이지), 사양 (2 페이지)
페이지 인쇄
Setting up the Projector Network Environment
4
4
The TCP/IP setting screen
appears, ready for network
settings for the projector.
Items
New
You can set the password to protect
Password
the TCP/IP setting.
DHCP
Select "ON" or "OFF" to determine
Client
whether to use DHCP Client.
IP
You can set this item when "DHCP
Address
Client" is set to "OFF".
Factory default setting: 192.168.150.2
Enter an IP address appropriate for
the network.
Subnet
You can set this item when "DHCP
Mask
Client" is set to "OFF".
Factory default setting:
255.255.255.0
Set the subnet mask to the same as
that of the computer and equipment
on the network.
Default
You can set this item when "DHCP
Gateway
Client" is set to "OFF".
Factory default setting: 0.0.0.0
* When not in use, set to "0.0.0.0".
DNS
Factory default setting: 0.0.0.0
Server
* When not in use, set to "0.0.0.0".
Note
•
Confi rm the existing network's segment (IP
address group) to avoid setting an IP address
that duplicates the IP addresses of other
network equipment or computers. If
"192.168.150.2" is not used in the network
having an IP address of "192.168.150.XXX", you
don't have to change the projector IP address.
•
For details about each setting, consult your
network administrator.
5
5
Click the "Apply" button.
6
6
The set values appear. Confi rm
that the values are set properly,
and then click the "Confi rm"
button.
•
Close the browser.
•
This completes the network settings.
•
After setting items, wait for about 15 seconds and then re-access.
•
Change the IP address of the setting computer back to its original address, which you have noted down in
Step 6-1 on page 14, and then connect the computer and the projector to the network.
-16
Setting example / Remarks