Sharp Notevision PG-D3550W 설정 매뉴얼 - 페이지 19

{카테고리_이름} Sharp Notevision PG-D3550W에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Notevision PG-D3550W 26 페이지. True wxga data projectors and short-throw true wxga data projector
Sharp Notevision PG-D3550W에 대해서도 마찬가지입니다: 운영 매뉴얼 (9 페이지), 빠른 매뉴얼 (2 페이지), 사양 (2 페이지)

Sharp Notevision PG-D3550W 설정 매뉴얼
Setting and Adjusting the
Projector
(Settings & Adjustments)
Example: "Picture" screen display for COMPUTER1
On these screens, you can make projector
settings or adjustments. You can set or
adjust the following items:
Picture Mode
CLR Temp
TM
BrilliantColor
Film Mode
DNR
Eco + Quiet
Resolution Setting
Signal Type
Dynamic Range
Video System
Video Setup
Resize
Overscan
OSD Display
Background
Note
If you click the "Refresh" button before the
screen is displayed completely, an error
message ("Server Busy Error") will be
displayed. Wait for a moment and then operate
again.
You cannot operate this page while the
projector is warming up.
For details about each item, refer to the
projector's operation manual.
2
Setup Guide
Projection Mode
Wall Color
OSD Language
Auto Sync
Auto Power Off
Auto Restart
Internal Speaker
RS-232C Speed
Fan Mode
Quick Start Menu
COMPUTER2 Select
®
TM
DLP
Link
®
TM
DLP
Link
Invert
All Reset
Controlling the Projector via LAN
Setting the Security
(Network – Security)
On this screen, you can make settings
relating to security.
Items
User Name
Setting of user name for security
protection.
Password
Setting of password for security
protection.
Accept IP
It is possible to set up to three IP
Address
addresses allowing connection to the
projector.
All IP
No limits are set to IP addresses
Addresses
connecting to the projector.
From only
For security improvement, only an IP
specifi c IP
address set by "Address 1-3" can be
addresses
connected to the projector.
Note
User Name and Password can be up to 8
characters.
You can input the characters below:
a-z, A-Z, 0-9, -, _
Description
-19