Sharp Notevision XG-C430X 설정 매뉴얼 - 페이지 39

{카테고리_이름} Sharp Notevision XG-C430X에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Notevision XG-C430X 45 페이지. True xga portable lcd projectors
Sharp Notevision XG-C430X에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 사양 (2 페이지), 사양 (2 페이지)

페이지 인쇄

Resetting the Lamp Timer of the Projector via LAN

When the projector is connected to a network, you can use HyperTerminal or a similar com-

munications program to send a command to reset the lamp timer. The example below uses

Windows

XP as the operating system.

Click "Start" – "All Programs" –

"Accessories" – "Communica-

tions" – "HyperTerminal".

• If you do not have HyperTerminal in-

stalled, see the operation manual of your

computer.

• Depending on the settings of your com-

puter, you may be required to enter your

area code and other details. Enter the

information as required.

Enter a name in the "Name" field,

and click "OK".

If you are required to enter the

area code, enter it in the "Area

code" field. From the "Connect

using" drop-down menu, select

"TCP/IP (Winsock)", and click

"OK".

Enter the IP address of the pro-

jector in the "Host address" field

(see "TCP/IP" on the "Network"

menu of the projector), and en-

ter the data port of the projector

in the "Port number" field

("10002" is the factory default

setting), and click "OK".

Select

"TCP/IP (Winsock)"

-39