Sharp Notevision XG-C435X 설정 매뉴얼 - 페이지 21

{카테고리_이름} Sharp Notevision XG-C435X에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Notevision XG-C435X 45 페이지. Sharp xg-c435x: install guide

Click "Internet Protocol (TCP/IP)",

and click the "Properties" button.

Confirm or change an IP address

for the setup computer.

1 Confirm and note the current IP ad-

dress, Subnet mask and Default

gateway.

Make sure to note the current IP ad-

dress, Subnet mask and Default gate-

way as you will be required to reset

them later.

2 Set temporarily as follows :

IP address : 192.168.150.3

Subnet mask : 255.255.255.0

Default gateway : (Do not input any

values.)

Note

• The factory default settings for the projector

are as follows:

DHCP Client : Off

IP address : 192.168.150.2

Subnet mask : 255.255.255.0

Default gateway : 0.0.0.0

After setting, click the "OK" but-

ton, and then restart the com-

puter.

After confirming or setting, proceed to "3. Setting up Network Connection for the Pro-

jector".

Setting up the Projector Network Environment

-21