Sharp Notevision XG-MB67X-L 설정 매뉴얼 - 페이지 27

{카테고리_이름} Sharp Notevision XG-MB67X-L에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Notevision XG-MB67X-L 32 페이지. Sharp notevision xg-mb67x: install guide

페이지 인쇄

Setting of Search Port

(ADVANCED[0]Search Port)

Sets the port number used when searching for the

projector from the network.

advanced>0

Please Enter Port Number for Search from Computer.

Valid range

: 1025 to 65535

Search Port

: 5006

Please Enter

: 5004

(change)

—> 5004

1 1 1 1 1 Enter "0" and press the "Enter" key.

2 2 2 2 2 Enter numerical value and press the "Enter" key.

Display set numerical value (*).

Note

• Set according to need. Normally, use with the fac-

tory default setting.

Return to Default Settings

(ADVANCED[!]Restore Default

Setting)

Returns all menu setting values to the default state.

advanced>!

Restore All Setting to Default(y/n)? y

— User Setting Initialized —

1 1 1 1 1 Enter "!" and press the "Enter" key.

2 2 2 2 2 Enter "y" and press the "Enter" key.

Note

• If the values for IP Address, Subnet Mask or Gate-

way of the projector have been returned to the

default settings via Telnet, the computer cannot

be connected to the projector depending on the

computer's network settings.

Setting up the Projector Using RS-232C or Telnet

Return to Main Menu

(ADVANCED[Q]Return to Main Menu)

Returns to the main SETUP MENU.

advanced>q

---------------------------------SETUP MENU--------------------------------

[1]IP Address

[4]User Name

[6]RS-232C Baud Rate [7]Projector Name [8]DHCP Client

[A]Advanced Setup

[V]View All Setting

setup>

1 1 1 1 1 Enter "q" and press the "Enter" key.

Returns to the SETUP MENU.

[2]Subnet Mask

[3]Default Gateway

[5]Password

[D]Disconnect All

[S]Save & Quit

[Q]Quit Unchanged

-27