Sharp PG-D2710X 설정 매뉴얼 - 페이지 22

{카테고리_이름} Sharp PG-D2710X에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp PG-D2710X 26 페이지. True xga data projector
Sharp PG-D2710X에 대해서도 마찬가지입니다: 운영 매뉴얼 (9 페이지), 빠른 매뉴얼 (2 페이지), 사양 (2 페이지), 사양 (2 페이지), 사양 (2 페이지), 사양 (2 페이지)

페이지 인쇄

Resetting the Lamp Timer of the Projector via LAN

When the projector is connected to a network, you can use the communications program

to send a command to reset the lamp timer. The example below uses Windows

operating system. When you use Windows Vista

referring to the following steps, because Windows Vista

HyperTerminal.

Click "Start" – "All Programs" –

"Accessories" – "Communica-

tions" – "HyperTerminal".

•

If you do not have HyperTerminal installed,

see the operation manual of your computer.

•

Depending on the settings of your computer,

you may be required to enter your area code

and other details. Enter the information as

required.

Enter a name in the "Name" ﬁ eld,

and click "OK".

If you are required to enter the

area code, enter it in the "Area

code" ﬁ eld. From the "Connect

using" drop-down menu, select

"TCP/IP (Winsock)", and click

"OK".

Enter the IP address of the

projector in the "Host address"

ﬁ eld (see "TCP/IP" on the

"Network" menu of the projector),

and enter the data port of the

projector in the "Port number"

ﬁ eld ("10002" is the factory default

setting), and click "OK".

-22

, use other communications program

does not come with

XP as the

Select

"TCP/IP (Winsock)"