Sharp PG-F317X - Notevision XGA DLP Projector 설정 매뉴얼 - 페이지 9
{카테고리_이름} Sharp PG-F317X - Notevision XGA DLP Projector에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp PG-F317X - Notevision XGA DLP Projector 34 페이지. Xga conference/classroom data-video projectors
Sharp PG-F317X - Notevision XGA DLP Projector에 대해서도 마찬가지입니다: 브로셔 및 사양 (4 페이지)
페이지 인쇄Setting up the Projector Network Environment
This section describes the basic procedure for using the projector via the network.
If the network is already constructed, the projector's network settings may need to be changed. Please
consult your network administrator for assistance with these settings.
You can make network settings both on the projector and on the computer. The following procedure is for
making settings on the computer.
Network settings on the computer
1.
Connecting the projector to a computer
Connect a LAN cable (Category 5, cross-over type) between the computer and projector.
2.
Setting an IP address for the computer
Adjust the IP settings of the computer to enable one-to-one communications with the projector.
3.
Setting up a network connection for the projector
Adjust the projector network settings to conform to your network.
®
• Microsoft
, Windows
States and/or other countries.
• PJLink is a registered trademark or an application trademark in Japan, the United States and/or other
countries/regions.
• All other company or product names are trademarks or registered trademarks of their respective compa-
nies.
LAN cable
(commercially available)
®
®
and Windows Vista
are registered trademarks of Microsoft Corporation in the United
Page 10
Temporarily change
the computer's IP
address.
Pages 11, 12
Use Internet Explorer
(version 5.0 or later)
to make various
projector settings.
Page 13
-9