Sharp PGF325W - WXGA DLP Projector 설정 매뉴얼 - 페이지 13
{카테고리_이름} Sharp PGF325W - WXGA DLP Projector에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp PGF325W - WXGA DLP Projector 34 페이지. Wxga (1280 x 800) 2500 ansi lumens, data/video projector
Sharp PGF325W - WXGA DLP Projector에 대해서도 마찬가지입니다: 사양 시트 (2 페이지)
페이지 인쇄
3. Setting up a Network
Connection for the
Projector
Settings for such items as the projector's IP
address and subnet mask are compatible with
the existing network.
Set each item on the projector as follows. (See
page 50 of the projector's operation manual
for setting.)
DHCP Client : Off
IP Address : 192.168.150.002
Subnet Mask : 255.255.255.000
1
Start Internet Explorer (version
5.0 or later) on the computer, and
enter "http://192.168.150.2/" in
"Address", and then press the
"Enter" key.
2
If a user name and a password
have not yet been set, just click
the "OK" button.
• If a user name and a password have
been set, input the user name and the
password, and click the "OK" button.
• If the user name or password is entered
incorrectly three times, an error mes-
sage will be displayed.
• When you are using Internet Explorer
7, other setup screen may be displayed.
In this case, make the proper adjust-
ments for the setup screen.
3
When the screen as shown on
the right appears, click "TCP/IP".
Setting up the Projector Network Environment
-13